Distribution, formulation, and technical expertise - structured as distinct services so you pull what you actually need.
A representative cross-section of stocked grades. Not on the list? We source to spec - call with your datasheet.
| Resin Family | Grade Category | Typical MFI Range | Density (g/cm³) | Typical Application |
|---|---|---|---|---|
| Polypropylene (PP) | Commodity | 2 – 35 g/10min | 0.90 – 0.91 | Injection molding, automotive, packaging |
| High-Density Polyethylene (HDPE) | Commodity | 0.1 – 8 g/10min | 0.94 – 0.96 | Blow molding, pipe, sheet extrusion |
| Polycarbonate (PC) | Engineering | 5 – 22 g/10min | 1.20 – 1.22 | Optical, electrical enclosures, automotive glazing |
| Nylon 6/66 (PA) | Engineering | 1 – 14 g/10min | 1.12 – 1.15 | Structural components, gears, under-hood |
| Thermoplastic Polyurethane (TPU) | Engineering | Shore A 70–95 | 1.10 – 1.25 | Seals, tubing, flexible overmold |
| PEEK / PEI / PPS | Specialty | Application-specific | 1.26 – 1.46 | Aerospace, medical, semiconductor hardware |
| Custom Compound Blends | Specialty | Engineered to target | To specification | Flame retardant, filled, reinforced, colored |
Real projects. Real results. Every case study includes materials used, the challenge, and measured outcomes.
No RFQ portal. No account setup. Email or call - we qualify requirements over the phone and turn around a quote the same day.